Mixcraft 6 Portable Woodworking

  1. Acoustica Mixcraft 6
  2. Mixcraft 6 Old Version
(937) 890-5197

Take your music to the next level. The ultimate software tool for pro-level mixing and mastering! With 6 additional virtual instruments and 28 additional effects, Mixcraft 8 Pro Studio features over $1250 worth of plug-ins – the complete package for “record-ready” productions with incredibly realistic instruments and superlative audio processing capabilities. The standard version of Mixcraft 6 costs an inflation-busting $74.95 (about £47) when bought as a download, just as version 5 did before it, while a boxed edition is available for 10 dollars more. If you're already a registered Mixcraft 5 user, you can upgrade for just $20. The Pro Studio bundle is pricier at $149.95 (for a download) and comes.

Technical Support (937) 890-5197
D-I-Y Support

Machine Models

Determine Which You Have?

Manuals (Free to Download)

Shopsmith Mark V/Mark 7 Information

Mark V/Mark 7 Service Information and Summary Manuals

Our New Products

Other Information Manuals


Shopsmith Mark V/Mark 7

Other Products

Mixcraft 6 Portable Woodworking

List View Search For Common Issues With Solutions

12 NOON - 3:00 PM
Only $19.99 for Your First 15 Minutes & $1.00 Per Minute After
(937) 890-5197
Call For an Appointment
Message. They will Call you Back.


If your equipment is under Warranty,
call our Customer Care Line at
(937) 890-5197 at no charge to you.
If your equipment is Not Under Warranty, or you acquired it from a source other than Shopsmith, contact a Shopsmith Tech Expert.


With a long heritage of over 63 years and 600,000 plus machines in circulation, our Customers have asked for more access to Shopsmith Engineer Support to:

  • Provide recommendations for keeping your machine operating at optimum efficiency
  • Help guide you through a procedure
  • Assist with source materials such as diagrams, manuals, etc.
  • Guide you through part selection for a technical issue
  • Direct you to the wealth of 'Getting Started' Materials
  • Or even just to walk you through how to get started!

The Shopsmith Engineering Team is lead by our Shopsmith Engineer, a leading Quality Assurance Professional And 40+ Year Shopsmith Veteran. If his team can't help, it's likely nobody can.

While we wish we could bottle Shopsmith Experts, and have unlimited resources, they just aren't available. So, we have created a special Shopsmith Engineering Support Line especially dedicated for Equipment No Longer Under Warranty. (Our equipment is such high quality; it lasts and lasts!)

1Schedule an AppointmentBook Online
Call Customer Care at (937) 890-5197 to Schedule For You
2Pay by Credit CardProvide your Credit Card information to bill you for:
  • $19.99 for the first 15 Minutes of your call.
  • Any time over 15 minutes will be billed at $1.00 per minute
  • You will be quoted for estimated additional time if your call takes longer than 15 minutes.
  • No Money will be refunded for Less than 15 minutes
3Get The Most From Your Call! When Scheduling Online Yourself, will be able to:
  • Schedule your appointment & receive a confirmation
  • Provide information on what you need so the Tech Expert can prepare for your call
  • Include pictures or videos to assist your Tech Expert
Calling Engineering Technical Support Directly will allow you to have immediate response if they are available, and do not have a scheduled appointment, during 12:00pm & 3:00pm, M-F, Est.
Calling our General Customer Care Line will allow you to have a Representatives schedule your Shopsmith Engineering Support Appointment so you don’t have to. They will direct you through how to provide information to the Shopsmith Engineering Support Team.

We Look Forward to Speaking with You!

Shopsmith Multipurpose Tools

The Tool You Start With -- The System You Grow With


An Introduction To Multi-Purpose Tool Woodworking An American Classic since 1953

The predecessor of today's revolutionary Shopsmith MARK 7 (the legendary 5-tools-in-1 Shopsmith Mark V) was the world's original multi-purpose woodworking machine. Since its introduction in 1953, a series of important improvements have been made to the Mark V, including:

  • An upgrade from a 3/4 hp motor to a 1-1/8 hp motor, providing added power
  • An upgrade from a single bearing quill to a 2-bearing quill, reducing run-out & wobble
  • The introduction of new, larger table systems for added workpiece support & operator convenience
  • Larger, easier-to-operate rip fences with built-in accommodations for fixtures
  • A new removable safety switch
  • & ..and many other smaller improvements for added safety & working convenience

Over 600,000 Mark Vs have been sold world-wide since 1953.. Download unity 3d full version crackexchangefree. and today, most of them are still serving their owners, just as they did when they were new.

Today's MARK 7 represents the Ultimate Shopsmith Upgrade, supported by the amazing new PowerPro Headstock and including two more of the most needed woodworking tools in a single, compact package

With Shopsmith's latest MARK 7 machine, you get a 10' Table Saw - 34' Lathe - 12' Disc Sander - 16-1/2' Vertical Drill Press - Over/Under-Table Router - Over/Under Table Shaper and Horizontal Boring Machine in an amazingly small two-foot by six-foot space. Just tuck it snugly away in a corner of the garage or basement until it's needed then pull it out to go to work.

And, if you don't need the added advantages provided by the PowerPro Headstock.. or the included capabilities of an over/under table shaper and router, we still offer two tried-and-true Mark V versions that include all five of the other tool capabilities listed above.

Easy to use - switches from tool-to-tool in 90 seconds or less

And remember too that you don't have to be an experienced woodworker to produce top-notch results with ANY version of the Shopsmith Multi-Purpose Woodworking System. Thanks to their multi-purpose design, you need only learn a single set of controls to operate all the basic functions of the Mark V or MARK 7.. and switching from tool-to-tool is practically instantaneous.

*NOTE: In addition to the new MARK 7 version of Shopsmith's Multipurpose Machine, we also offer two versions of the original Mark V machine with a conventional 1-1/8 hp AC Motor and a mechanical speed changing mechanism. These Mark V machines come equipped to perform all of the operations of a MARK 7 Machine, with the exception of under-table shaping and routing (over-table shaping and routing can be performed with Mark V Machines using optional accessories).

Click here to visit comparison tables that identify the differences in specifications and table configurations for the various models of Shopsmith Multipurpose Machines.

10' Table Saw

12' Disc Sander

34' Lathe

Horizontal Boring

Acoustica Mixcraft 6

16-1/2' Drill Press



Mixcraft 6 Old Version

The Shopsmith Choice -- MARK 7 or Mark V ?

Shopsmith MARK 7 -- Delivers 7 Tool Functions • Table Saw • Lathe • Disc Sander • Drill Press • Router • Shaper • Horizontal Boring Machine


  • Digital Variable Reluctance Motor
  • 1-3/4 hp at 120V and 2 hp at 240V
  • Electronic Key Pad Speed Control
  • 250 rpm to 10,000 rpm

Shopsmith Mark V -- Delivers 5 Tool Functions • Table Saw • Lathe • Disc Sander • Drill Press • Horizontal Boring Machine


  • Conventional AC Motor
  • 1-1/8 hp at 120V
  • Mechanical Speed Control Dial
  • 700 rpm to 5,200 rpm

Mark 7 / Mark V