8/24/2021

New Genius Ktouch Clone Or Originalauto Diagnostic Tool

39

UOBD2 recently released the update version kess v2— New Genius (K-TOUCH), which allows reading / programming the ECU in modern vehicles over OBD2. Here is the instruction on how to install New Genius to read and write ECU.

O/S requirement: Windows XP/ 7

Multi-Language: English,Italian,German,French,Spanish,Portuguese,Hungarian

New Genius & Flash Point K-touch is the world’s first Touch & Map device which allows reading / programming the ECU in modern vehicles over OBD2.It is able to work without connection a computer during the critical phases of reading and writing of the ECU, ensuring the process is executed in complete safety.

  • Jan 02, 2017 Here is the comparison between Original and Clone New Genius K-touch Point OBDII/BOOT ecu chip tuning tool. First, it’s the genuine New Genius Master 1.5. Second, here goes to New Genius china clone, called Ktouch also. The New Genius clone unit. ABS plastic enclosure with ergonomic grip system safe.
  • New Genius/ Ktouch: Best. VXSCAN H90 J2534 Truck diagnostic tool –replacement NEXIQ USB. Troubleshoot Saab OG 9-3 SE’s with GM Tech2 Clone; vvdi key tool.
  • New Genius chip tuning tool is New Genius & Flash Point OBDII/BOOT Protocols ECU Hand-Held Chip Tuning Tool. New Genius Touch Map device Supprorted All Vehicle Catgeories. New genius obd ii/boot master ECU mapping/chip tuning tool supports CAN-BUS, KWP and J1850 Protocols.

Video guide:

STEP-by-step instruction on automatically install new genius on Windows xp:

Chapter 9 waves & lightmr.'s learning website login. Preparation

Disconnect network connection when installing and using K-touch.

Go to K-TOUCH disk (F:).

Open K-TOUCH-E->read first.pdf

Click Accept for the license agreement.

Minimize the pdf interface.

Step 1 Install K-TOUCH V1.0

Open K-Touch.

Click Next.

Click Install.

Installing K-Touch…

Select setup language. OK.

Setup requirements
Installing requirements…

Click OK to restart the computer.

Step 2 Install K-Touch and Race EVO

Open New Genius K-Touch.

Click Next.

Click Install.

Installing K-Touch…

Select setup language. OK.

Setup requirements
Installing requirements…

Race EVO (rev. 431 build 829) Setup 1 – Install Aware Wizard: click Next.
Important info for Race EVO installation: click Next.

(Windows XP SP3 with 1GB RAM memory)
Go to read first.pdf, to copy Dimensione Sport Customer Code: C7535 to Race EVO. Then click Next.

Click Next.

Click Next to install.

Cancel the tick on Run Race EVO (rev. 431 build 829) Setup 1 now. And click Finish for installing Race EVO.
Click Finish for installing K-Touch.

Tips on K-Touch read out data using computer

1 connect k-touch machine with power adapter, and then wait until the machine boot. If the machine cannot boot, turn off power then connect to power again, until the machine boot.

2 use USB cable to connect the machine to the computer, then read out K-Touch data.

Found new hardware wizard: click Next.

Click Finish for installing the software for DimSport – New Genius Device.

Go to Computer Management.

Select Device Manager->Universal Serial Bus controllers->DimSport – New Genius Device.
Then close computer management.

Step 3 Run K-Touch

Open K-Touch on Desktop.

Click Accept definitely.

Please update database…. Click No.

Select K-Touch->Explore…

Race EVO: GENIUS is not updated…. Click OK.

Select FILE/Read/000. Then save on Desktop.
Click Yes to extract header.

Back to FILE to select Write. Import on Genius.
Open file “000” (not notepad 000) on desktop.

Back to FILE.

select Help (on top menu bar)->System information.
Read and click OK.

Select Help (on top menu bar)->Information About.
This is K-touch standard version 7.06.506 build 3029.
Done

more info about automatic & manual installation New Genius on WIN 7/XP, please go to
http://obd2-diag.blogspot.com/2016/01/how-to-install-new-genius-k-touch-on.html

Related posts:

New genius error:

New genius error solution: reset New genius TF card!!!

Following parts step – by –step show how to reset the TF card for the New genius K-Touch Master V5.005.003 supplied by www.eobdtool.co.uk.

Fix file download:

If the TF card is broken, just insert the CD into the computer, and then find out the folder “TF Fix” to fix. Or download fix file from

New Genius K Touch Clone Or Original Auto Diagnostic Tool Kit

http://www.chinaautodiag.com/html/free-download-genius-flash-point-obd2-boot-master-ecu-programmer-touch-map-24544.html

Step – by –step installation procedure:

Open new genius DVD, copy folder “TF FIX” to the desktop.

Open folder “TF FIX” at the desktop, cut “K-touch” Disc Image File, then paste it to D:(E: or F: is okay too).

Moving “TF FIX” from C: to D: . Note: do not put these files into any folder.

Look at following connection picture which shows how to use the SD card.

Note: change to the other TF card is disallowed; you have to use the built -in TF card.

New Genius Ktouch Clone Or Originalauto Diagnostic Tool

New Genius Touch Clone Or Original Auto Diagnostic Tool With App

You may get message prompting you format the removable disk, click “Ok” to format.

Open “TF FIX” folder, then folder”Win32DiskImager”, then application “Win32DiskImager”, then click “save” icon, then select “K-touch” Disc Image File, then click “Save”.

Click “Write”, then you get a message “Writing to a physical device….” click “Yes”.

New Genius Touch Clone Or Original Auto Diagnostic Tool Program Keys

Write Successfully.

Exit.

Click the right corner green icon, select “Eject USB2.0-CRW”.

Video at YouTube is more vivid:

New Genius Touch Clone Or Original Auto Diagnostic Tool Sba

This is fromobdtool: Best car diagnostic tools for salewebsite Auto ECU Programmer technical support: New genius K-Touch Master V5.005.003 reset TF card procedure

New Genius Touch Clone Or Original Auto Diagnostic Tool Comparison

Who Views This Also Viewed: